Promag CON-485 Series Instructions d'exploitation télécharger pdf (Page 60)

5 Operation / adjusting device settings - Set-up to commissioning Memo-Graph S

60 Endress+Hauser

3. Now enter the IP address. The port address is 8000.

Entering the device address and the release code is optional.

Confirm the input with "C

ontinue" and start the transfer with OK.

The connection is now established and the device is saved in the device database.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 97 98

Safety Data Manager (SDM) 1
Memo-Graph S 1
Overview 2
Brief overview 2
CHANGE PROTOCOL 3
Table of contents 5
1 Safety instructions 7
1.4 Operational safety 8
1.5 Return 8
2 Identification 9
2.1.2 Product structure 10
3 Installation 11
3.3 Installation instructions 12
3.4 Post-installation check 12
4 Wiring 13
4 Wiring Memo-Graph S 14
14 Endress+Hauser 14
4.2 Terminal diagram 15
4.2.5 CPU board (slot 0) 19
Ethernet connection 21
4.4 Ingress protection class 22
4.5 Post-connection check 22
Set-up to commissioning 23
5.5 Set-up using PC 26
5.7.1 Basic settings 27
5.7.2 Signal settings 31
Factory setting “0” 32
36 Endress+Hauser 36
# Warning! 37
" Caution! 38
Endress+Hauser 43 43
44 Endress+Hauser 44
5.7.4 Products 48
5.7.5 Texts 50
5.7.6 Administration 50
5.7.8 Service 53
5.9.1 RS 232 56
5.9.2 RS 485 56
5.9.3 PROFIBUS DP 56
5.10.2 MAC address 58
5.10.3 IP address allocation 58
5.10.4 Subnet mask allocation 59
5.10.5 Gateway allocation 59
21 CFR 11 61
6.2.3 Administration 63
6.2.5 Analogue inputs 64
6.3.1 General 64
Endress+Hauser 67 67
68 Endress+Hauser 68
7 Procedure in operation 69
7.2 The functions in detail 72
7.2.3 Enter comment / text 74
7.2.5 Extras 74
7.2.6 Set-up 77
8Accessories 78
Software 79
Operating language 79
RSG12A1 79
80 Endress+Hauser 80
9.4 Spare parts 81
9.4.2 Spare parts list 82
Endress+Hauser 83 83
9.5 Repairs/return 84
9.6 Disposal 84
Measured variable / 85
_ _ _ _ _ 86
10.3 Output values 87
10.4 Power supply 87
10.5 Accuracy 88
10.6 Operating conditions 88
10.7 Mechanical construction 89
320 mm (12.6“) 91
320 mm (12.6 “) 91
254 mm (10 “) 91
10.9 Data storage 92
10.11 Accessories 93
10.12 Further documentation 93
BA 138R/09/en/08.04 98
51006049 98
FM+SGML 6.0 98

Commentaires sur ces manuels

Pas de commentaire

Promag CON-485 Series Instructions d'exploitation Page 60

Commentaires sur ces manuels

Produits connexes et manuels pour Outils de mesure et de mise en page Promag CON-485 Series