Promag CON-485 Series Informations techniques télécharger pdf (Page 37)

Proline Promag 50W, 53W

Endress+Hauser 37

Certificates and approvals

Ex approvals Information about currently available Ex versions (ATEX, FM, CSA) can be supplied by your Endress+Hauser

Sales Centre on request. All explosion protection data are given in a separate documentation which is available

upon request.

CE mark The measuring system is in conformity with the statutory requirements of the EC Directives.

Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.

C-Tick mark The measuring system is in conformity with the EMC requirements of the Australian Communications

Authority (ACA).

Pressure Equipment Directive Flow meters with a nominal diameter smaller or equal DN 25 are covered by Art. 3(3) of the

European directive 97/23/EG (Pressure Equipment Directive) and are designed according to sound engineer

practice. For larger nominal diameter, optional approvals according to Cat. III are available when required

(depends on fluid and process pressure).

PROFIBUS DP/PA

certification

The flow device has successfully passed all the test procedures carried out and is certified and registered by the

PNO (PROFIBUS User Organisation). The device thus meets all the requirements of the following specifica-

tions:

• Certified to PROFIBUS PA, profile version 3.0 (device certification number: on request)

• The device can also be operated with certified devices of other manufacturers (interoperability)

FOUNDATION Fieldbus

certification

The flow device has successfully passed all the test procedures carried out and is certified and registered by the

Fieldbus Foundation. The device thus meets all the requirements of the following specifications:

• Certified to FOUNDATION Fieldbus Specification

• The device meets all the specifications of the FOUNDATION Fieldbus H1.

• Interoperability Test Kit (ITK), revision status 4.0 (device certification number: on request)

• The device can also be operated with certified devices of other manufacturers

• Physical Layer Conformance Test of the Fieldbus Foundation

MODBUS

certification

The measuring device meets all the requirements of the MODBUS/TCP conformity test and has the “MOD-

BUS/TCP Conformance Test Policy, Version 2.0”. The measuring device has successfully passed all the test

procedures carried out and is certified by the “MODBUS/TCP Conformance Test Laboratory” of the University

of Michigan.

Other standards, guidelines EN 60529:

Degrees of protection by housing (IP code)

EN 61010:

Protection Measures for Electrical Equipment for Measurement, Control, Regulation and

Laboratory Procedures.

EN 61326/A1 (IEC 6326):

Electromagnetic compatibility (EMC requirements)

NAMUR NE 21:

Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment.

NAMUR NE 43:

Standardisation of the signal level for the breakdown information of digital transmitters with analogue

output signal.

NAMUR NE 53:

Software of field devices and signal-processing devices with digital electronics.

1 2 ... 32 33 34 35 36 37 38 39 40

Commentaires sur ces manuels

Pas de commentaire

Promag CON-485 Series Informations techniques Page 37

Commentaires sur ces manuels